MBC-071(hex flat up) & MBC-081(hex point up)
Replaces (C-071 & C-081)
FEATURES
- The shaft hole of the middle plate is rotated a few degrees which grips the shaft securely once the top plate and nuts are tightened to the correct torque.
- This bracket is used when there is not enough room for the MBB-071/08.
- Two required for each PM486FP
- Nuts must be torqued to 2.2 lb-ft (3 Nm)
- Supplied with M5 x 15 pan head phillips mounting bolts and hardware
Technical Documents